LG標準系列電動固定螺桿空氣壓縮機

☆排氣壓力：0.7-1.3Mpa
☆排氣量：0.8-35M 3/Min
☆電機功率范圍：7.5-200kW
產品簡介：
經濟的運行成本
系統采用0-100%的排氣量無級調節。當用氣量減小時，排氣量跟著減小，電機的電流也同時降低；當不用氣時，空壓機空車運轉，空車過久自動停機。當用氣量增加時，恢復重車。節能效果優。
良好的環境適應性
超常的冷卻系統設計，特別適用于亞洲高溫、高濕環境。優良的隔振技術和降噪措施，使螺桿空壓機的安裝無須專用的基礎，只要留出小的通風和維護空間，就能安置好您的壓縮機。
螺桿轉子型線的設計特點：
一、完全實現“曲面對曲面”嚙合，從而有助于形成流體動力潤滑膜，降低通過接觸帶的橫向泄漏，提高壓縮機效率；以及改善轉子的加工、檢驗性能。
二、采用“大轉子、大軸承、低轉速”的設計思路，轉速比其他品牌低30~50%，可以降低噪聲和振動，降低排氣溫度，提高轉子剛性，延長使用壽命，減小對雜質和油碳化物敏感性。
三、功率范圍4~355KW，其中18.5~250KW均為不帶齒輪箱直聯，200KW和250KW更為4極電機直聯，轉速低至1480轉/分。
四、全面符合甚至超越GB19153-2003《容積式空氣壓縮機能效限定值》國家標準的要求。

$LG standard series electric fixed screw air compressor



Exhaust pressure: 0.7-1.3mpa

Exhaust volume: 0.8-35m 3 / min

Motor power range: 7.5-200kw

Product introduction:

Economic operation cost

The system adopts stepless regulation of 0-100% exhaust volume. When the air consumption decreases, the exhaust volume decreases, and the current of the motor decreases at the same time; when the air is not used, the air compressor runs empty and the empty car stops automatically for too long. When the air consumption increases, the heavy vehicle will be recovered. Energy saving effect is the best.

Good environmental adaptability

Extraordinary cooling system design, especially suitable for high temperature and humidity environment in Asia. Excellent vibration isolation technology and noise reduction measures, so that screw air compressor installation without special foundation, as long as the minimum ventilation and maintenance space, you can place your compressor.

Design features of screw rotor profile:

1、 Fully realize the "curved surface" engagement, which helps to form hydrodynamic lubrication film, reduce the lateral leakage through the contact belt, improve the efficiency of the compressor, and improve the processing and inspection performance of the rotor.

2、 Adopting the design idea of "big rotor, big bearing and low speed", the speed is 30-50% lower than other brands, which can reduce noise and vibration, reduce exhaust temperature, improve rotor rigidity, extend service life and reduce sensitivity to impurities and oil carbides.

3、 The power range is 4-355kw, in which 18.5-250kw is direct coupling without gearbox, 200kW and 250KW are more direct coupling of 4-pole motor, and the speed is as low as 1480 rpm.

4、 It fully meets or even exceeds the requirements of gb19153-2003 "limited value of energy efficiency of positive displacement air compressor".