天水巨豐YT28鑿巖機新款上市

新一代隧道專用
邊孔鑿巖機省時省力
天水巨豐鑿巖機械有限責任公司
生產

◆YT28G型鑿巖機是國內首屈一指的鑿巖工具。它重量輕、鑿速快、故 障率低、可靠性高，深受用戶歡迎。

◆但廣大用戶常為開鑿巖洞時右側的超挖量大于左側而苦于無法解決。原因是鑿巖機后部柄體結構所致（柄體右側比左側寬，左側邊緣離鑿巖機中心線尺寸為110mm，而右側則是185mm）造成打邊孔時右側的角度大于左側。為了幫助用戶解決這一問題，我廠經過多次對鑿巖機柄體右側結構的改進，并進行了充分的現場試驗（右側邊緣離鑿巖機中心線尺寸由185mm縮減到135mm，接近左側的110mm）用戶反應效果甚好。基本解決了開鑿巖洞時右側比左側超挖量大的問題，既減少了出渣量，又節省了砌碹時的水泥用量，同時會使工程的成本隨之降低。

◆這種改進的YT28G鑿巖機既不影響零件通用率，同時提高了氣管彎頭和注油器的使用壽命，深受已使用用戶歡迎。$

YT28G rock drill is the leading tool in China.Its light weight, chiseling speed, low failure rate, high reliability, welcomed by users.

However, the majority of users are often unable to solve the problem because the overexcavation quantity on the right side is larger than that on the left side.The reason is the structure of the handle body at the back of the drill (the right side of the handle body is wider than the left side, and the left edge is 110mm from the center line of the drill, while the right side is 185mm), which results in the Angle on the right side is larger than that on the left side when drilling side holes.In order to help users solve this problem, our factory has improved the structure on the right side of the drill handle body for many times, and carried out full field tests (the size of the right edge from the center line of the drill was reduced from 185mm to 135mm, close to 110mm on the left).This solution basically solves the problem that the overcut quantity on the right side is larger than that on the left side during excavation, which reduces the amount of slag produced and the amount of cement used during masonry walling, and at the same time reduces the engineering cost.

This improved YT28G rock drill does not affect the universal rate of parts, and does not increase the price, which is very popular with users.